60 days: The Serenbe Project

After the Bullseye glass cullet is washed and dryed, I store it like this next to the kiln and the scale so that when I get ready to weigh the glass, I can load the scales, weigh the glass and load the mould from the same place. Also, I don't have to move the moulds as they are very heavy.



















This is Bullseye casting cullet on the left and Bullseye casting billets on the right. Bullseye is some of the best glass made. The billets have been cut on the wet saw, then washed, then stored


















Ok, if the cullet is too large, it has to be made smaller and I do this with a sledge hammer and a garbage compactor bag (because they are thick bags). Safety glasses are a must.


















I'm crushing the glass a bit here to make it smaller. The very small frit I use to help secure the wire.

What I thought would be a good idea was to blog about the remainder of the time from now until installation at Serenbe. There is somewhere around 60 days left until installation and today is DAY 60.

Tonight I applied kiln wash to the new 21" diameter mould and the wash will cure at 500 deg. I left the lid of the kiln propped open until it reaches around 120 and then I will completely close it. Another oven is just about ready to be unloaded (leaves). I added some amber color to these leaves. I left the lid open a bit on this oven also so that it would cool about 10 more degrees. Then I will remove the leaves from the mould, reload the mould and fire again.

Glass Studio Processes and The Serenbe Project

These moulds pictured are still for The Serenbe Project. Take a minute and visit the Serenbe Community, it is a delightful place. After the clay model is removed from the glass mould, the moulds have to be checked to make sure there are no undercuts (places where the glass can become lodged). This pictures on the blog tonight show how I finish the moulds.

You can see the greenish gray area on the top edge of the mould. That is leftover clay that has to be removed. I finish removing the clay, and sand down the glass moulds

This is how I finish the edges and remove the remaining clay.

I then brush out the mould to make sure that it is clean before taking a warm damp rag to go over it one more time.

After the mould is cleaned like this, it is ready to be placed in the kiln to be force-dried.

I found these cool little paintbrushes at Harbor Freight Tools. They are good for a lot of things in the studio and they are so inexpensive, I just throw them away!

At this point, the mould is still very wet. The plaster material with which I invest the mould has a very short working time (under 10 minutes on a cooler day). This means that most days in the South, you better have your plan together when you begin to mix, because on a 95 degree day with high humidity, the working time is more like 5-6 minutes. I still like this material very much.

These glass leaves will be installed at Serenbe in late October.

Cast Glass and The Serenbe Project

A quick post tonight because I have to get back to work. Last post, I discussed the problem with the wires as the glass becomes molten. I came up with a solution, which was great! Here are a couple of pictures that I took right after these leaves came out of the kiln tonight. The important thing was that the wire extend from inside the glass in the middle not on the edge where the glass is thinner. It worked!

This mould is the round one to fit the kiln. It has been force-dried and is ready to be cured at 1475 degrees for this kiln.

The Serenbe Project

This was a very busy day in studio doing more work on The Serenbe Project , which will be installed toward the end of October. In case you have not read any of my earlier posts about The Serenbe Project , hop over there and check it out.

I was having trouble with the wires, which are embedded in the cast leaves, "falling" to the side. I came up with this solution, shown on the right, I drilled a little hole in the mould, and placed the end of the wire in the hole. So, when the other end of the wire is embedded in the glass, the drilled end acts as an anchor.


This is a close-up of the moulds and the embedded wires. This seems to have solved the problem.

I'm washing all of the cullet, getting it ready to place in the moulds. After I wash the glass, I put the glass in containers which are placed close to the kiln so that it is ready to weigh and place in the mould. This glass is Bullseye cullet for casting.

The other problem that I had was that the moulds that I had made were wasting kiln space (and electricity). The way that I solved this problem was to design a mould that was the exact size of the kiln shelf, which means that it used all of the available kiln space. I "dammed" the plaster with aluminum roof flashing mounted on a round piece of wood (this kiln shelf is round).

This is the new round mould which looks like it was a good solution. The clay leaves have just been removed (to the left of the mould). After trimming the mould with a dremel,
and cleaning the clay residue off of the inside of each leaf cavity, the mould was put in the kiln to dry it. This will take about 2 days. I blogged before about the Castalot mould material that I'm using. I really like this mould material.

More Bullseye glass being washed.

Beautiful Bullseye glass ,washed and ready to fill a mould!

Preparing Kiln Wash and Coating a Mould

A couple of people have asked me how I prepare kiln wash and apply it to the kiln floor, kiln shelves and the moulds for The Serenbe Project. This time when I used the kiln wash, I took pictures of the process so that I could post here.

I mix my kiln wash according to the manufacturer's instructions, which was 4:1 in this case.

I mix kiln wash, a bucket at a time, so that when I need it, it is ready. I measure out the water that I need and the amount of kiln wash that I need. For example, if I have 12 cups of water, then I would measure out 3 cups of kiln wash. I always put the water in the bucket first and then sprinkle the kiln wash on the top of the water.

The picture (above right) shows the kiln wash floating on top of the water (before being stirred).

This picture (above) shows the kiln wash after I have stirred the wash some.

After I have stirred for 20 minutes or so, or until it dissolves, I apply the kiln wash to the mould (in this case), kiln shelf or kiln floor. Using a hake brush, I saturate the brush, lightly run the brush over the rim of the bucket, then lightly brush the wash across the mould in lines going toward and away from me. When the first coat is absorbed, which will be quickly, I apply the second coat at a right angle to the first coat, so I'm painting this on from side to side for the second coat. For these moulds, I only put three very light coats of wash. The number of coats of kiln wash that you use depends on the application. On the floor of my kilns, I applied at least eight coats. I reapply kiln wash to the floor about once each year, depending on how much each kiln is used.

The mould on the left is a mould to which kiln wash has been applied, the mould on the left has not had the wash applied yet. The hake brush is on the right hand side of this picture. The other little brush that I use to coat the inside of the leaf cavity is an old BBQ brush.

After I finish applying the kiln wash, I place the moulds in the kiln and fire to 500 degrees to cure the wash, WITH THE LID SLIGHTLY PROPPED OPEN WITH A KILN POST. When you prop the lid open, this allow moisture to escape from the interior of the kiln. This is the manufacturer's directions for this wash. No matter what type of wash you use, you have to dry it in the kiln before you can fire on the shelf or the mould.

Return to Blogger

ok, a while back I wrote about blogging for artists and said that I had opened a blogging account with Go Daddy because they offered podcasting. The short story is taht I have returned to Blogger. I returned for several reasons. The primary reason is because the Go Daddy templates are very "fixed" (you know we artist do not like to be tied down), and because it is a very s l o w blogging servie. I was very disappointed with the service. Some of my friends told me that they checked my blog for studio updates, but they did not have all year for the images to load....it's time to go!

This is a lesson learned. Blogger probably will add the podcast feature later because they do offer a good product and the price is great!I plan to customize the template that I use on blogger, but until then....I will just blog.

Tara GlassArt Studio and "Reality Life" = Blogging

Although there have been no posts here, this does not mean that I have not been busy. Indeed, I have. For the past several days, I have been searching and reviewing other blogging platforms (I hope to share that info for others). There have been other features that I have been wanting to use on my blog that are not possible with blogger (at least the free version). So, I went on a search and read and read and read. I think I'm ready to make a change, but sometimes it is what the techies don't tell you that is most important. Anyway, I have to take the risky attitude of nothing ventured, nothing gained, and I hope you will take a leap over to the Tara GlassArt Studio blog. All things equal, I will start posting at the Tara GlassArt Studio blog tonight. This new blog also provides my own URL and more exposure for the blog. The blogger blogspot will be left up so that this link will be provided and hopefully we will have more people taking part in discussions.

Tara GlassArt Studio blog, I think will be more "real". After all, isn't blogging really "reality life" in writing. One thing that I hope will be enjoyed is that I have installed a blog casting feature and will be using that as often as I can. That freature will make it "real" and also provides us with more of what I call "texture" in our lives. If I can learn the technical part of the blogcast, I will provide a blogcast from the Alabama Folk School, the week of June 22, when I go there to teach and to learn from my students.

So, as they say down South, saunter on over to Tara GlassArt Studio blog and take a gander. It will be fun. And, please tell me what you think!

A Summer Art Workshop in the Catskills

My friends Cliff Simon , who is a set designer and supreme (no pun intended, he made Diana Ross' wedding cake, supreme(s), get it? Ok, it's time to go to bed) and Julian Hazlett just got back from the Catskills where Cliff took part in a workshop for painting of set designs. Cliff sent the pictures of his workshop at Cobalt Studios Cliff is really talented and I hope you enjoy the pictures. He is a professor in the Theatre Department at the University of Alabama in Birmingham.

If Wishes Were Horses, We'd All Be Kings.......Mother Goose

The first person that welcomed us to the neighborhood when we moved to our current home was our young neighbor. She was 8 at the time. We have watched her grow and she turned 16 at the end of April. She has always been able to "out skateboard", "out bicycle", and do everything better than any boy in the community. Sunday afternoon, our doorbell rang and there she stood with her horse, Dudley, standing at our front door, on the front porch. She just wanted to show us Dudley and said that he got better gas mileage than her Toyota truck.

Today

I just heard from my friend Julian Hazlett. He sent me an email to say that he had enjoyed a wonderful lunch at the Culinard Restaurant which had just opened at the Innovation Depot in downtown Birmingham, Alabama. We are planning to meet for lunch in the next couple of weeks at Culinard.

Posted my classes that I will be teaching at the Alabama Folk School, on the Cultural Alliance and heard from Bonner Wagnon who said I did a good job covering all of the details. I had attended a seminar taught by Bonner, that covered the nuances of entering information relative to one's career in the Cultural Alliance website calendar which is called Active Culture.

Talked to my good friend Debra Riffe today for a while. Debra is so funny. She makes me laugh at the most simple things and we enjoy swapping stories of the South together. She will be showing her very wonderful linoleum block prints this weekend at the Aldridge Botanical Garden Juried Art Show. I plan to go over and visit her at the show for a spell.

Debra and I often talk about why we need texture in out lives, especially Southern texture. More about that on another post.

Sweet Home Alabama

In celebration of The Year of Alabama Arts by the Alabama State Council on the Arts, a few months back when Southern Living had written an article about my work, I was thrilled. Shortly after that I received an email from the Alabama Bureau of Tourism saying that they had sent out a notice in their e-news about the Southern Living article as I had registered on their site as an artist. Now, I find that my page is still there!! (I thought they would take it down at the end of 2007)

I love to garden. Today when I checked my small vegetable garden, my beans were up. I can't wait to taste that part of summer.

Birmingham Business Journal

I finally picked up several copies of The Birmingham Business Journal from February 15 of this year so that I would have a copy of the article that they wrote about me working on my business plan. It is a very nice article.



This afternoon, my friend, Julian Hazlett, called me to say "Hello" and to ask what was going on. He had visited New York and has returned home. It was great to hear from him. We were discussing traveling to Selma, Alabama on Sunday for Kathryn Tucker Windham's 90 birthday celebration. Word has it that Kathryn has purchased 1000 combs and will teach everyone that attends to play the comb.

The Business of Art

I have posted several times about the business side of art. This year, I have focused on the business side of art as it relates to web site development, revenue sources, business plans, etc.

In January of this year I attended a web summit entitled smARTist Telesummit. This was a web workshop that was organized by Ariane Goodwin and conducted on the web. It featured discussions led by experts on money, licensing, web design, marketing, taking care of yourself and many other valuable topics. smARTist Telesummit was very well organized and full of information.

Today, I was contacted by the staff of Ariane Goodwin and they requested permission to use one of my images in some of the follow-up marketing packages!!! Needless to say I was thrilled! I have Ariane Goodwin's book about writing an artist statement and it is an excellent resource. The book contains exercises that you do whereby you develop your own language for your artist statement. I have not finished the exercises, but I will be working on them and will post here when I'm done.

Tonight I have been working on a newsletter that will be sent to my mailing list. This is an email marketing program that I purchased from Go Daddy with "spam compliant" attributes. I'm excited to finally get this finished and I will be emailing that out later in the week. I feel like I accomplished something big today.

Monday Monday...but it is Tuesday Tuesday

Today is Tuesday and I worked on the financial section of my business plan today. This week I plan to call on the gallery that represents my work, which is located in town. Short post today, gotta run!

Memorial Day on the Tennessee River

Each Memorial Day Weekend, Decatur Alabama sponsors a hot air balloon festival called the Alabama Jubilee. Decatur is located on the Tennessee River in North Alabama and is a beautiful place.









These pictures were taken during the 2007 balloon festival. The first one is taken with a very large cotton field in the foreground and the balloons are off in the distance.









The second and third picture was taken as we got closer and the last picture was taken from the Tennessee River Bridge and you can see two balloons that look like small dots. We were returning home from a trip to




the farm when these were taken. My friend Debra Riffe planned to go to the balloon festival this weekend. I hope the weather was great in North Alabama for the festival.
The quality of the pictures is not that good, but I think you can see how beautiful is, particularly when you see them riding the wind over the river.

TGIF

It's Friday and will be a busy weekend working more on the Serenbe Project. Tomorrow, the studio has to be cleaned and things put back in place. Then, it will be ready to go again.

What do you see when you look in the mirror?

I received an email today from Bob Straka that contained the following story and I wanted to share the story and give Bob credit for a super challenge : pass it on

'With graduation season in full swing, it’s an opportune time to sample some wisdom from Steve Jobs, who gave the commencement address at Stanford University in June 2005. Here’s a snippet from what he told the students that day.

"For the past 33 years, I have looked in the mirror every morning and asked myself: ‘If today were the last day of my life, would I want to do what I am about to do today?’ And whenever the answer has been "No" for too many days in a row, I know I need to change something."

What do you see when you look in the mirror?

Thanks, Bob.

May 19, 2008 Summer and Teaching Glass at Alabama Folk School

Today is Monday. I feel as though I am out of a cave, as I have been working on a very big project. More on that later in the year.

I'm doing some brainstorming for the class that I will teach at Alabama Folk School.
I will teach two classes. Each class is one week, and June 22 - 27, I will teach "Let's Kick Some Glass!!" and it will entail all of the basics of how to work in kilnformed glass. The class does not require prerequisites and will include basic design theory and basic studio practices. Glass selection, glass cutting and grinding, and firing schedules will be covered. I hope that we will have a good reception to the class and I think it will be fun.The second class, August 24-29, will be Mosaics: Telling a Story or Painting a Picture with Stones, Twigs, glass and ceramic tiles, broken china, yarn and anything else we can find.

One of the things that I love about the South this time of year is the rhododendrons in bloom. I took some picture of the ones in my yard and posted on the blog. They finished blooming this weekend and I'm glad I can share this beautiful picture with you.

May 6, 2008 Cast Glass, Carved,

I am still going through exhibition applications and trying to make decisions. Had to pick up work today, as an exhibition closed on last Friday. Also have some correspondence to write then I will be done for the evening. It has been a long day.

May 5, 2008, Cast Glass

Previously on my blog I showed how I formed the pieces of plastiscene to fill the crevices in the mold box. This first image shows the leaf in the mold box, which has been "dammed" and sprayed with PAM. I then mix the plaster with an electric drill and get ready to pour.

This picture shows the mold box after I have poured the investment into the box (covered the leaf with the plaster). If you look carefully you will see my respirator, which I use regularly.


Finally I use a level to shim the mold box to make sure that it will cure on a level platform.


This is the mold after the box is removed and the clay (plastiscene) leaf taken out. The clay was removed very easily. I anticipated some problem with this, but had none.

Today was spent doing a lot of paperwork. I am deciding what exhibitions for which to apply and this takes a lot of time. Meanwhile, here are some other photos of the cast leaves process. I have been taking a lot of photos to share. Until then.....